Serving the Norfolk area  ·  (757) 796-6867  ·  Open Mon-Sun 7am-7pm
📞 (757) 796-6867 Free Quote

Metal Roofing in Hampton, VA (23669) · Local Professionals

Norfolk Metal Roofing · Fast response in Hampton and the Norfolk area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Hampton's bayfront neighborhoods take a beating that inland roofs never see. Salt spray off the Chesapeake Bay eats at fasteners and coatings, and nor'easters push wind-driven rain straight into seams and flashing. If you live near Buckroe Beach or along the Hampton River, your roof is working harder than most.

We're Norfolk Metal Roofing, and since 2009 we've been installing, repairing, and replacing metal roofs across Hampton and the surrounding areas. From the older homes near Phoebus to the raised cottages out on Grandview Island, we know how salt air and storm seasons treat a roof here, and we build for it.

Metal Roofing in Hampton (23669)

Hampton sits on low ground where the bay, the river, and tidal creeks all meet. That means salt air reaches almost every roof in 23669, and it corrodes standard fasteners and cheap coatings faster than most homeowners expect. We see it constantly in Buckroe and Fox Hill: screws backing out, panels loosening at the seams, and flashing that has quietly given up. The housing stock adds its own challenges. You've got 1920s bungalows on tight lots near Victoria Boulevard, mid-century brick ranches off Mercury Boulevard, and newer raised homes in flood zones where the roof pitch and access are anything but standard. We plan each job around the actual conditions on your property, not a one-size-fits-all checklist.

Our team has been serving Hampton and the Norfolk area since 2009, and we're a Metal Roofing Alliance member. That means we install to manufacturer specs, which matters when salt air and storm wind are part of the deal.

Our services in Hampton

How a Job Works in Hampton

Step 1: You call us at (757) 796-6867 or request a free estimate online. We schedule an on-site assessment, walk the roof, check fasteners, seams, and flashing, and talk through what you're seeing. If it's a leak, we find the source instead of guessing. You get a written scope and a clear price before anything starts.

Step 2: We handle the work and the logistics. In Hampton, that often means coordinating with the city on permits, especially for full replacements, and working around tight driveways or narrow streets in older neighborhoods like Phoebus. If your home is in a historic district or under HOA review, we help you understand what panel profiles and colors are likely to pass. We pull the permit, schedule the inspection, and keep the job moving.

Step 3: Cleanup and final walkthrough. We magnet-sweep for nails, haul away old materials, and walk the finished roof with you. We don't leave until you've seen the work and your property is clean.

Pricing in Hampton depends on the job, but here are realistic starting points. Metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you're going over existing shingles, retrofit starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney work at $600. Coatings start at $2.50 per square foot, and gutters for metal roofs run from $9 per linear foot. The biggest cost factors are roof size and pitch, how accessible the property is, the condition of the existing roof, and how urgent the work is. Storm damage inspections are free. Call (757) 796-6867 for a free estimate and a straight answer.

✅ Metal Roofing Alliance Member, licensed and insured for work in Hampton and nearby areas.

My roof is near Buckroe Beach and the fasteners are rusting. Is that normal?
Yes, it's very common in Hampton's bayfront neighborhoods. Salt spray accelerates corrosion on standard fasteners and lower-grade coatings. We typically replace them with corrosion-resistant fasteners and check the panel washers at the same time. If the panels themselves are still sound, re-fastening is often enough. We'll tell you honestly whether a repair or replacement makes more sense.
A nor'easter peeled back part of my roof. How fast can you respond in Hampton?
We prioritize storm and wind damage calls and offer free inspections for storm damage. Call (757) 796-6867 and we'll schedule the soonest available assessment. We can often make temporary repairs to prevent further water intrusion while we scope the permanent fix. We document everything with photos for your insurance claim, though coverage decisions are always up to your insurer.
What does a typical metal roof replacement cost in Hampton?
Most full replacements start around $9 per square foot, but the final number depends on your roof's size and pitch, access, whether we're removing existing layers, and the panel system you choose. A simple ranch off Mercury Boulevard will price differently than a steep Victorian near the Old Point Comfort area. We give you a written estimate after a free on-site assessment.
Do I need a permit to replace my roof in Hampton?
In most cases, yes. A full replacement or re-roof typically requires a roofing permit, and the rules on how many existing layers you can recover over are set by code. The City of Hampton website is the best place to confirm current requirements. We handle permit applications and inspections as part of the job so you don't have to chase paperwork.
My neighbor says my new roof panels cross the property line. What do I do?
Property line disputes are best settled before work starts. We recommend having a survey done if the line is unclear. If your home is in an HOA, review the architectural rules first, since panel profile and color often need approval. We can provide product specs and color samples to support your HOA submission, and we'll adjust the layout to stay within your property lines.
Are you fully insured for work at my Hampton home?
Yes. We carry general liability insurance and workers' compensation coverage. We're happy to provide a certificate of insurance before work begins. That protects you if anything goes wrong on the job and covers our crew while they're on your property.
What maintenance should I do on a metal roof in Hampton between storms?
Check fasteners and washers once a year, especially on bayfront homes where salt air speeds up corrosion. Keep gutters clear of pine needles and leaf debris, and look for loose flashing around chimneys and skylights after any nor'easter. A quick annual inspection catches small issues before they become leaks. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Norfolk

All your work handled by qualified professionals in Norfolk

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Norfolk

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Norfolk · Response within 24h · No commitment · ☎ (757) 796-6867

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Norfolk ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm