Serving the Norfolk area  ·  (757) 796-6867  ·  Open Mon-Sun 7am-7pm
📞 (757) 796-6867 Free Quote

Metal Roofing in Portsmouth, VA (23704) · Local Professionals

Norfolk Metal Roofing · Fast response in Portsmouth and the Norfolk area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Portsmouth is a city of tight historic blocks and low-lying tidal ground, from the 1790s Federal townhouses in Olde Towne to the post-war brick ranches out past Churchland. The housing stock here is old, the salt air is real, and the storms come up the Elizabeth River with a vengeance.

Homeowners in 23704 call Norfolk Metal Roofing because we have been working these same streets since 2009. We know what a nor'easter does to a standing seam panel on a raised home in Willoughby Spit, and we know how to flash a chimney on a 150-year-old roof in Olde Towne without tearing up the historic character.

Metal Roofing in Portsmouth (23704)

Portsmouth sits on a low, flat coastal plain where the Elizabeth River meets Hampton Roads, and much of the city is only a few feet above sea level. That means tidal flooding and king tides are not abstract concerns. They push water into crawlspaces and saturate the ground, which affects how we anchor a roof and how we handle drainage. The housing stock is just as varied: Federal and Greek Revival townhouses in Olde Towne, Victorian and Colonial Revival homes on the shaded streets of Ghent and Colonial Place, 1920s bungalows in Larchmont, and beach cottages and newer raised homes along Ocean View and Willoughby Spit. Live oaks, crape myrtles, and loblolly pines drop limbs and shade roofs, and the salt air off the bay eats at fasteners and flashing. We have seen it all, and we know that a metal roof here needs to be installed with coastal corrosion in mind, not just wind uplift.

Our team has been serving Portsmouth and the surrounding Norfolk area since 2009. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we handle everything from a simple leak repair to a full copper roof on a historic home.

Our services in Portsmouth

How a Job Works in Portsmouth

Step 1: You call us at (757) 796-6867 or request a free estimate online. We schedule an on-site assessment, and we show up when we say we will. We walk the roof, check the flashing, seams, and fasteners, and look at the attic and crawlspace if needed. You get a written estimate with clear pricing and options, no pressure.

Step 2: Once you approve, we pull the permits. In Portsmouth, roofing permits are commonly required for a full replacement, and the rules vary, so we verify with the city. If you are in a historic district like Olde Towne, we coordinate with the design review board on panel profile and color. Our crews are experienced with tight lot access and careful staging, and we protect your landscaping and siding. We keep you updated on the schedule and any weather delays.

Step 3: When the work is done, we clean the site thoroughly, haul away all debris, and do a final walkthrough with you. We make sure you understand the warranty and maintenance, and we do not leave until you are satisfied.

Pricing for metal roofing in Portsmouth depends on the size and pitch of your roof, the material you choose, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind that code limits how many layers you can recover. Repairs start at $450, and screw replacement and re-fastening start at $750. For historic homes needing copper or specialty metal, that starts at $20 per square foot. We give free estimates, so call (757) 796-6867 and we will give you a realistic number for your specific roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in Portsmouth and nearby areas.

My Olde Towne townhouse has a slate roof that is failing. Can you match the historic look with metal?
Yes. We specialize in copper and specialty metal roofing that mimics the look of slate or standing seam, and we understand the historic district design review process. We can provide samples and work with you to get approval.
A nor'easter just peeled back some panels on my roof in Willoughby Spit. How fast can you get out?
We offer free storm damage inspections and prioritize emergency repairs. Call us at (757) 796-6867, and we will schedule an inspection as soon as possible, usually within a day or two depending on demand. We can tarp the roof if needed to prevent further damage.
What does a typical metal roof repair cost in Portsmouth?
Most repairs start at $450, but the final cost depends on the extent of damage, access, and materials. For example, a simple flashing repair might be on the lower end, while a larger leak repair or screw replacement could be higher. We give free estimates so you know before we start.
Do I need a permit for a metal roof replacement in Portsmouth?
Yes, a permit is typically required for a full replacement or re-roof. The City of Portsmouth website (https://www.portsmouthva.gov) has information on permits and inspections, and we can handle the paperwork for you. Requirements vary, so we always verify with the building department.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What are the rules?
Property line and overhang rules can be tricky. We recommend checking your plat and local ordinances, and we can help you understand setbacks. If you are in an HOA, you will also need approval for the roof style and color. We can provide documentation to support your HOA application.
Are you insured for work on my Portsmouth home?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance upon request.
What maintenance does a metal roof need in Portsmouth's climate?
Salt air and storms can loosen fasteners and wear flashing. We recommend an annual inspection, especially after hurricane season, to check for loose screws, sealant wear, and debris buildup. Keeping gutters clean and trimming overhanging limbs also helps. We offer maintenance plans and free inspections.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Norfolk

All your work handled by qualified professionals in Norfolk

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Norfolk

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Norfolk · Response within 24h · No commitment · ☎ (757) 796-6867

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Norfolk ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm