Serving the Norfolk area  ·  (757) 796-6867  ·  Open Mon-Sun 7am-7pm
📞 (757) 796-6867 Free Quote

Metal Roofing in Norfolk, VA (23510) · Local Professionals

Norfolk Metal Roofing · Fast response in Norfolk and the Norfolk area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Norfolk is a city where the water is never far away, and neither is the history. From the 1790s Federal townhouses in Freemason to the raised beach cottages along Willoughby Spit, the housing stock here spans three centuries, and every roof has to stand up to salt air, nor'easters, and tidal flooding that can creep up the Lafayette River.

Homeowners in 23510 and across Norfolk call Norfolk Metal Roofing because we understand what salt and storms do to a roof. We've been working on Ghent's shaded streets and Larchmont's brick colonials since 2009, and we know that a roof here isn't just about looks. It's about keeping the weather out for the long haul.

Metal Roofing in Norfolk (23510)

Norfolk sits on a low, flat coastal plain where the Elizabeth River meets Hampton Roads and the Chesapeake Bay. Much of the city is only a few feet above sea level, and tidal creeks like the Lafayette River weave through neighborhoods such as Colonial Place and Riverview. That means drainage and grade matter as much as the roof itself. On raised homes in Ocean View and Willoughby Spit, we're often working above flood level, and the wind uplift requirements are stricter. In older neighborhoods like Ghent and Freemason, tight lots and mature live oaks and crape myrtles can make access tricky, but our crews are used to it. We also deal with the aftermath of nor'easters and hurricanes like Isabel in 2003, which is why we recommend standing seam and metal shingles for their wind resistance and ability to shed salt-laden rain.

Our team has been serving Norfolk and the surrounding areas since 2009. We're a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we handle everything from historic district coordination to storm damage documentation.

Our services in Norfolk

How a Job Works in Norfolk

Step 1: We start with a free on-site assessment. You call us at (757) 796-6867, and we schedule a time to inspect your roof, discuss your options, and provide a written estimate. We'll also walk you through any permit requirements, which you can verify with the City of Norfolk website.

Step 2: Once you approve the estimate, we handle the work. In historic districts like Freemason or Ghent, we coordinate with design review boards if needed. On tight lots, we plan material delivery and staging carefully to avoid disrupting your neighbors. We pull the necessary permits and schedule inspections according to local rules.

Step 3: After installation, we clean up thoroughly, haul away all debris, and do a final walkthrough with you to make sure you're satisfied. We leave your property as clean as we found it, or better.

Pricing for metal roofing in Norfolk depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. Repairs start at $450, and screw replacement and re-fastening at $750. For a more accurate estimate, call us at (757) 796-6867. We'll assess your roof and give you a clear, no-obligation quote.

✅ Metal Roofing Alliance Member, licensed and insured for work in Norfolk and nearby areas.

My home in Ghent has a steep, complex roof with dormers and mature trees overhead. Can you still install a metal roof?
Yes, we handle complex roofs in Ghent and similar historic neighborhoods all the time. We'll assess the pitch, access, and tree cover, and recommend a panel profile that works with your home's architecture. We also take care to protect landscaping during the job.
A nor'easter just blew through and I have wind-lifted panels on my roof in Ocean View. How quickly can you respond?
We offer free inspections for storm and wind damage and prioritize emergency repairs. Call us at (757) 796-6867, and we'll schedule a prompt visit to secure your roof and provide a repair estimate.
What's the typical cost to replace a roof on a 1920s brick colonial in Larchmont?
Most Larchmont colonials fall in the mid-range for metal roofing, but the exact cost depends on square footage, roof complexity, and material choice. As a guide, replacement starts at $9 per square foot, and we'll give you a precise quote after inspecting your roof.
Do I need a permit to replace my roof in Norfolk, and does the historic district affect the process?
Yes, roofing permits are commonly required for full replacement or re-roof, and historic districts may have design review that restricts panel profile and color. We recommend checking with the City of Norfolk for specific requirements, and we can help coordinate the paperwork.
My HOA requires approval for exterior changes. Can you help with the application for a metal roof?
We can provide product specifications, color samples, and installation details to support your HOA application. We're familiar with common HOA requirements in Norfolk and can coordinate with your board to streamline the process.
Are you fully insured for roofing work at my Norfolk property?
Yes, we carry general liability and workers' compensation insurance. We're happy to provide certificates of insurance upon request so you can have peace of mind.
What maintenance does a metal roof need in Norfolk's salt air and storm season?
We recommend annual inspections, especially after storm season, to check fasteners, seams, and flashing. Salt air can accelerate corrosion on some materials, so we often suggest coatings or choosing corrosion-resistant metals. Regular maintenance will extend the life of your roof.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Norfolk

All your work handled by qualified professionals in Norfolk

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Norfolk

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Norfolk · Response within 24h · No commitment · ☎ (757) 796-6867

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Norfolk ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm