Serving the Norfolk area  ·  (757) 796-6867  ·  Open Mon-Sun 7am-7pm
📞 (757) 796-6867 Free Quote

Metal Roofing in Virginia Beach, VA (23451) · Local Professionals

Norfolk Metal Roofing · Fast response in Virginia Beach and the Norfolk area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Virginia Beach is a city of raised beach houses and brick ranches, and the salt air off the Atlantic and the Chesapeake Bay works on both. From the Oceanfront and Rudee Inlet to the quiet streets of Alanton and Great Neck, roofs here take a beating from wind, sun, and salt.

We are Norfolk Metal Roofing, and since 2009 we have been installing, repairing, and replacing metal roofs across Virginia Beach and the surrounding area. If you live in 23451 or anywhere near the beach, you know that a roof has to handle nor'easters, summer thunderstorms, and the occasional hurricane. We get it, and we build roofs that last.

Metal Roofing in Virginia Beach (23451)

Virginia Beach sits on a low, flat coastal plain, and much of the city is only a few feet above sea level. That means tidal flooding and king tides are a real concern, especially in neighborhoods like Ocean View and Willoughby Spit. The housing stock is a mix: raised beach houses on pilings, brick ranches from the 1950s and 60s, and newer construction in places like Red Mill and Strawbridge. Many homes have tight lots with mature live oaks and loblolly pines, which can drop limbs and shade the roof, leading to moss and moisture issues. The salt air corrodes fasteners and flashing, and wind-driven rain finds every gap. We use corrosion-resistant materials and fastening methods designed for coastal Virginia.

Our team has been serving Virginia Beach and the Norfolk area since 2009. We are a Metal Roofing Alliance Member, fully insured with general liability and workers' compensation, and we know the local building department requirements. Whether you need a new standing seam roof on a raised home in Croatan or a repair on a brick colonial in Thalia, we have the experience to do it right.

Our services in Virginia Beach

How a Job Works in Virginia Beach

Step 1: You call us at (757) 796-6867 or fill out our contact form. We schedule a free on-site assessment at your convenience. We will inspect your current roof, discuss your options, and provide a written estimate. We also help with insurance claim documentation if storm damage is involved.

Step 2: Once you approve the estimate, we pull the necessary permits from the city. In Virginia Beach, roofing permits are required for replacements and some repairs, and we handle that for you. We coordinate with your HOA if you have one, especially in neighborhoods like Ocean Lakes or Bay Colony where design review may be required. Our crews are experienced with tight lot access and steep grades, and we protect your landscaping during the work.

Step 3: After the job is done, we clean up thoroughly, haul away all debris, and do a final walkthrough with you to make sure you are satisfied. We do not consider a job complete until you are happy.

Pricing for metal roofing in Virginia Beach depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs, including leak repair, start at $450, and screw replacement and re-fastening starts at $750. We also offer metal roof coating and painting from $2.50 per square foot, and gutters for metal roofs from $9 per linear foot. For a free estimate tailored to your home, call us at (757) 796-6867.

✅ Metal Roofing Alliance Member, licensed and insured for work in Virginia Beach and nearby areas.

My house is in the Croatan neighborhood and sits on a raised foundation. Can you install a metal roof over the existing shingles?
Yes, we can often install a metal roof over your existing shingles, provided the structure can support the added weight and your current roof has only one layer of shingles. We will inspect your roof and let you know if a retrofit is a good option for your home. Many raised beach houses in Croatan and nearby neighborhoods choose this to save time and cost.
A nor'easter just blew through and I have wind-lifted panels on my roof in Virginia Beach. How quickly can you respond?
We understand that storm damage can be urgent. We offer free inspections for storm and wind damage. Call us at (757) 796-6867, and we will schedule an inspection as soon as possible. Our team is experienced with insurance claims and can provide the documentation you need.
What is the typical cost to replace a metal roof on a 1,500 square foot ranch in Virginia Beach?
For a 1,500 square foot ranch, a metal roof replacement typically ranges from $9 to $14 per square foot installed, depending on the material and complexity. That translates to roughly $13,500 to $21,000. Factors like roof pitch, number of penetrations, and whether you choose standing seam or corrugated panels will affect the final price. Call us for a free estimate.
Do I need a permit to replace my roof in Virginia Beach, and how do I get one?
Yes, roofing permits are generally required for roof replacements and some repairs in Virginia Beach. The permit process and fees are handled by the city. You can find more information on the City of Virginia Beach website. We can handle the permitting for you as part of our service.
My HOA requires approval for exterior changes. Can you help with the application for a metal roof?
Yes, we can provide the necessary documentation, such as material samples and color charts, to help you get HOA approval. We are familiar with many HOAs in Virginia Beach and can guide you through the process. We also respect property lines and will ensure the installation meets setback requirements.
Are you fully insured for roofing work in Virginia Beach?
Yes, we are fully insured, carrying both general liability and workers' compensation insurance. We can provide certificates of insurance upon request. Your property is protected when you work with us.
What maintenance does a metal roof need in Virginia Beach's coastal climate?
In Virginia Beach, metal roofs should be inspected annually, especially after storm season. Check for loose fasteners, debris buildup, and any signs of corrosion. We recommend cleaning gutters and removing debris from the roof to prevent moisture issues. We offer maintenance plans and inspections to keep your roof in top shape.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Norfolk

All your work handled by qualified professionals in Norfolk

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Norfolk

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Norfolk · Response within 24h · No commitment · ☎ (757) 796-6867

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Norfolk ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm