Serving the Norfolk area  ·  (757) 796-6867  ·  Open Mon-Sun 7am-7pm
📞 (757) 796-6867 Free Quote

Metal Roofing in Suffolk, VA (23434) · Local Professionals

Norfolk Metal Roofing · Fast response in Suffolk and the Norfolk area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Suffolk still feels like a place where a metal roof makes sense. From the historic brick storefronts around Main Street to the horse farms and stables out toward Whaleyville and Holland, and the newer subdivisions off Shoulders Hill Road and Godwin Boulevard, this city mixes working land with growing neighborhoods. ZIP 23434 covers a lot of ground, from downtown Suffolk to the edges of Chuckatuck and Driver, and the housing stock runs from century-old farmhouses to brand-new builds that need a roof that can handle Virginia heat, humidity, and the occasional nor'easter.

Homeowners and property managers here call Norfolk Metal Roofing because we have been installing, repairing, and replacing metal roofs since 2009, and we know the difference between a barn roof that needs to shed limbs and a residential standing seam job that has to pass HOA review. If you are near Lake Kilby, Constant's Wharf, or the Suffolk Executive Airport, we have probably worked on a roof down the road.

Metal Roofing in Suffolk (23434)

Suffolk is not Norfolk, and the roofing work shows it. The city stretches from the tidal flats along the Nansemond River out to farmland with long gravel driveways and outbuildings, so access and staging change from job to job. On the older lots near downtown and the Suffolk Historic District, we deal with steep pitches, tight side yards, and mature trees that drop limbs and fill valleys with debris. On the newer construction off Route 10 and Route 58, the challenge is often drainage and wind uplift, because these roofs sit on open ground and take the full brunt of summer thunderstorms and coastal storms. We also see a lot of agricultural buildings, pole barns, and stables where corrugated and ribbed panel roofing is the right call, and we handle those with the same insured crews that do residential standing seam.

Our team has been serving Suffolk and the surrounding Norfolk area since 2009, and we are a Metal Roofing Alliance member. That matters when you are comparing panel profiles, paint warranties, and fastener systems for a climate that swings from humid 95-degree afternoons to freezing nights at the eaves.

Our services in Suffolk

How a Job Works in Suffolk

Step 1: You call (757) 796-6867 or request a free estimate online. We schedule an on-site assessment, walk the roof and the attic if accessible, check flashing, fasteners, and decking, and talk through whether a repair, a retrofit over existing shingles, or a full replacement makes sense for your property. You get a written scope and a clear price before any work starts.

Step 2: We pull the required roofing permit through the City of Suffolk, coordinate any HOA or historic district review if your property falls under one, and schedule delivery and crew access. On farm properties and tight downtown lots, we plan material staging around driveways, gates, and power lines so the job moves without tearing up your yard or blocking neighbors.

Step 3: Cleanup and final walkthrough. We magnet-sweep for fasteners and debris, haul away old material, and walk the finished roof with you. We leave your property clean and show you what to watch for during storm season.

Pricing in Suffolk depends on square footage, roof pitch and complexity, decking condition, access, and how quickly you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and a metal roof replacement starts around $9 per square foot. If you are retrofitting over existing shingles, that starts around $7 per square foot, subject to code limits on existing layers. Repairs and leak repairs start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, and skylight work starts around $600. For farm buildings and commercial roofs, we give free estimates so you can budget accurately. Call (757) 796-6867 to set up a free estimate in Suffolk.

✅ Metal Roofing Alliance Member, licensed and insured for work in Suffolk and nearby areas.

My barn roof near Whaleyville is leaking around the fasteners. Can you repair it without replacing the whole roof?
Yes, in many cases. On agricultural buildings, failed screw gaskets and back-out are common, and we can replace and re-fasten screws, reseal penetrations, and replace isolated panels. We inspect the purlins and decking first, because if the structure is sound, a targeted repair often makes more sense than a full tear-off.
A storm just peeled back panels on my roof in Suffolk. How fast can you get out?
We prioritize active leaks and storm damage. Call (757) 796-6867 and we will schedule an inspection, often the same week, and tarp or secure the roof if needed. We document the damage for your insurance claim, but coverage and deductible decisions are between you and your carrier.
What does a typical metal roof replacement cost for a ranch home in ZIP 23434?
For a standard ranch, most replacements fall in the range of $9 to $14 per square foot installed, depending on panel type, pitch, decking repairs, and access. Standing seam runs higher, around $10 to $16 per square foot. We give a firm written estimate after seeing the roof, and we do not add surprise charges.
Do I need a permit to replace my roof in Suffolk, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We pull the permit and coordinate inspections as part of the job. For the most current rules, check the City of Suffolk website or call the building department directly.
My neighborhood has an HOA and my neighbor says my new metal roof color is not approved. What do I do?
Start with your HOA's architectural review guidelines before you order material. We can provide panel profile and color samples, and we coordinate with HOA reviewers when needed. On property line questions, roof drainage and overhang should stay within your lot lines and local setback rules, and we can point out issues during the estimate.
Are you insured for work on my Suffolk property?
Yes. We carry general liability insurance and workers' compensation coverage for our crews. We can provide a certificate of insurance before work begins so you and your property manager have it on file.
What maintenance should I do on a metal roof in Suffolk between storms?
Keep gutters and valleys clear of pine needles and leaf debris, especially under the loblolly pines common around Suffolk. Check fasteners and sealant at penetrations once a year, and after any nor'easter or tropical system, look for lifted panels or dents from fallen limbs. A quick inspection in spring and fall prevents most leak calls we get.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Norfolk

All your work handled by qualified professionals in Norfolk

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Norfolk

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Norfolk · Response within 24h · No commitment · ☎ (757) 796-6867

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Norfolk ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm